Saloon Door Style Close Hinges Only (door image for illustration purposes only) For 2 doors as pictured 2 pairs of hinges are required Listing is for 1 pair These strong steel, electro brass plated, saloon door style hinges are ideal for Cafes, Bars, Pubs, Restaurants etc. Each pack comes with a pair of hinge sets, including the fixings which are made up of 8 countersunk screws and 8 pan head screws. The hinges are self closing, but also have a "Hold Open Feature" where the door can be pushed an extra notch and stay open without being held. Fixing instructions, with diagrams are included. Self Closing: The door will returned to the closed position when let go. Hold open Feature: Push the door slightly further to let it fall on the hold open notch. Fitting Instructions Step 1: Mount the top pivot to the top of the door, approximately 7/16" (11 mm) from the back edge of the door. Step 2: Mount the bottom pivot to the bottom of the door, 5/16" (8 mm) from the back edge of the door. Step 3: Mount the bottom pivot to the door frame, allowing 7/8" (22 mm) of height. Step 4: Place the door into the bottom pivot. Locate the screw hole positions for the top pivot on the door frame. Mount the frame section of the hinge, allowing for 3/8" (9.5 mm) of height between the upper and lower sections (to allow the door to rise when it is opened). Fixing instructions and diagrams are included.